SXC3E
High Performance Station Router With 3 Ethernet Ports
The HR-WRAPSXC3E adds two additional Ethernet ports to the HR-WRAPSXC, eliminating the need for external Ethernet switches. It is particularly well suited for use as a high performance station router where multiple devices (cameras, access controllers, PTZ controllers, etc) need to be connected to the network.
HR-WRAPSXC3E Specification (Link)
- WRAPSXC3E-M
- WRAPSXC3E-2
- WRAPSXC3E-37
- WRAPSXC3E-4
- WRAPSXC3E-5
- WRAPSXC3E-9
Note:
M=multiband, 25dBm/-92dBm
(2.4, 4,9*, 5GHz)
37=3.65** GHz, 25dBm/-92dBm
9=900MHz, 28dBm/-93dBm
2=2.4GHz, 28dBm/-97dBm
5=5.8GHz, 28dBm/-94dBm
4=4.9GHz*, 26dbm/-94dBm


We put the HauteSpot microNVR and Global Emergency Resources eWRAP to the test. Driving 700 miles from Meridian, Mississippi to Augusta, Georgia, we put a Mobotix megapixel camera attached to a microNVR and eWRAP in a moving van. The microNVR recorded at full frame rate and resolution all of the video from the camera. It also transcoded and pushed video out over the eWRAP using 3G EvDO wireless. The push architecture remained connected throughout the entire trip including through some relatively remote areas. See as short captured video of this test. 70 miles an hour, 700 miles, 10fps, VGA…